Rockford Fosgate RFK-HD9813 1998-2013 Harley Davidson Amp Installation Kit

Rockford Fosgate RFK-HD9813 1998-2013 Harley Davidson Amp Installation Kit

Rockford Fosgate RFK-HD9813 1998-2013 Harley Davidson Amp Installation Kit

Car Security Keyless Start. HID Lights and Head Lights. Pre Fab Speaker Boxes. Shirts Hats and More. TV Shelves – Sound Bar. Kit also includes Y-adaptors when adding lower fairing or Tour-Pak speakers, and rear speaker output harness for installation of baglid speakers. The cables have been upgraded to provide the necessary current and voltage requirements for the amplifier, and the heat-sink provides extended thermal time under demanding situations. Integrates into factory electrical system without modifications or cutting. Harley-Davidson® , Road Glide® and Street Glide® are registered trademarks of Harley-Davidson Motor Company This listing includes: Contents (1)Power Harness (1)Front Input Harness (1) Front Output Harness (2) Rear Speaker Harness (2) Speaker Output Y-Adapter (8) Wire Zip Tie Wraps (4) Amp Screws (6) Road Glide® Heat Sink Screws (2) Road Glide® Amp Mounting Brackets (2) Street Glide® Heat Sink Screws (2) Street Glide® Threaded Studs (1) Street Glide® Amp Mounting Bracket (1) Amp Heat Sink Features: – No drilling required for easy installation – Securely mounts amplifier under fairing – Complete Plug and Play wire harness – Element ready to withstand the harsh outdoor environment – FULL spec cable – meets or exceeds AWG (American Wire Gauge) requirements – 100% Pure Crystal-Oxygen Free Copper (PC-OFC) – Plug and Play design for easy installation – Designed for use with 1998-Current Harley-Davidson® Motorcycles – Designed for use with Power Marine TM400X4ad model amplifier – Includes mounting brackets for Bat Wing and Shark Nose fairings – Includes amp output Y-adaptors for lower fairing and/or TourPak speakers – Includes rear speaker output harness for connection of rear speakers Specifications: Battery PWR/GND Gauge: 8 AWG Amplifier PWR/GND Gauge: 8 AWG Speaker Wire Gauge: 16 AWG Speaker Wire Gauge: 16 AWG Fuse Size: 60 Amp Fuse Type: MAXI. Please make sure to box up product in original boxes and all paperwork and parts. Speakers with Burnt Coils or frozen up or physical damage will not be accepted. Amplifiers that have been smoked from improper use will not be accepted. (Boxes, Packing, Instructions, ETC) Everything we sent needs to come back. No physical damage will be accepted!!! To see our Feedback. Sign Up For Big Giveaways & Promos. The item “Rockford Fosgate RFK-HD9813 1998-2013 Harley Davidson Amp Installation Kit” is in sale since Tuesday, March 30, 2021. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio & Video Installation\Amplifier Kits”. The seller is “bigjeffonlineinc” and is located in Ocala, Florida. This item can be shipped to United States.
  • Custom Bundle: No
  • Modified Item: No
  • MPN: RFKHD9813
  • Gauge: 8 AWG
  • Brand: Rockford Fosgate
  • Type: Single
Rockford Fosgate Power T500-1bdCP Constant Power Series Class BD Monoblock Amp

Rockford Fosgate Power T500-1bdCP Constant Power Series Class BD Monoblock Amp

Rockford Fosgate Power T500-1bdCP Constant Power Series Class BD Monoblock Amp

Rockford Fosgate Power T500-1bdCP Constant Power Series Class BD Monoblock Amp

Rockford Fosgate Power T500-1bdCP Constant Power Series Class BD Monoblock Amp

Rockford Fosgate Power T500-1bdCP Constant Power Series Class BD Monoblock Amp

Car Audio & Video. Install Accessories & Security. Home Audio & Video. Rockford Fosgate Power T500-1bdCP Constant Power Series Class BD Monoblock Amp. Constant Power Series Monoblock Class bD Car Amplifier. 4 ohms: 300 watts x 1 chan. 2 ohms: 500 watts x 1 chan. 1 ohm: 500 watts x 1 chan. Dynamic Power Output: 690 watts. LED power (blue), protect (yellow) and thermal (red) indicators. Variable Bass Boost (0 to +18 dB bass boost at 45 Hz). Gyrator based punch EQ eliminates frequency shift with boost. Audiophile grade speaker connections. Preamp Pass-Thru RCA outputs to daisy chain multiple amps. 3-Way System Protection circuitry (thermal, overload, and speaker short protection). Dual speaker terminals simplify the hookup of multiple speakers. Heavy duty cast aluminum convection heatsink with Direct Thermal Management evenly distributes heat across the entire heatsink for improved efficiency. Nickel-plated RCA level inputs. Nickel-plated clamp wire terminals. Variable low-pass filter (35-250 Hz, 24 dB/octave Butterworth). Selectable Infrasonic filter (12 dB/Octave, -3dB at 28 Hz). Frequency response: 20-250 Hz. Designed and Engineered in the U. Dimensions: 11-7/16″ L x 8-3/16″ W x 2-3/16 H. 4-gauge power and ground wiring is required for installation. One (1) Rockford Fosgate Power T500-1bdCP Constant Power Series Class BD Monoblock Amplifier. Since founded in 2001, customers have always been at the core of everything we do. Our enthusiastic audiophile staff are here to create the best sound systems that work for you and your needs. Dynamic Autosound 1527 W. Expedited Services are also available. Acceptance of Contract Terms The following forms a legal agreement between you and Dynamic Autosound Inc. By using this site you are acknowledging that you have read, understood, and agree to be bound by these terms and all applicable laws and regulations. If you do not agree to these terms please do not use this site. Any claim relating to the use of this site, its materials and any sales thereunder is governed by the laws of the Commonwealth of California, without regard to conflict of laws rules and California will be the sole jurisdiction and venue for any litigation arising from the use of or orders made on the site. Dynamic Autosound is pleased to offer this website for the benefit of our customers and the general public. Feel free to enjoy the site as much as you like. Your choice to visit our website or to take advantage of its features does not create an agency relationship between you and Dynamic Autosound. You are free to browse our site and use its features, and in doing so you are not acting on our behalf. To the extent Dynamic Autosound provides instructions on how to use or take advantage of any feature of the site, you are under no obligation to use or take advantage of that feature. The instructions Dynamic Autosound provides are intended solely to inform you how to take advantage of any such feature, should you in your sole discretion ultimately decide to do so. Except as stated herein, none of the material may be copied, reproduced, distributed, republished, downloaded, displayed, posted or transmitted in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of Dynamic Autosound. This permission terminates automatically if you breach any of these terms or conditions or upon the request of Dynamic Autosound. Upon termination you must immediately destroy any downloaded and printed materials. You also can not “mirror” any material contained on this site. Trademarks The trademarks, service marks and logos (the “Trademarks”) used and displayed on this site are registered and unregistered Trademarks of Dynamic Autosound and others. Dynamic Autosound enforces its intellectual property rights to the fullest extent of the law. Dynamic Autosound prohibits use of the Dynamic Autosound logo as a “hot” link to the Dynamic Autosound site unless establishment of such a link is approved in advance by Dynamic Autosound in writing. DYNAMIC AUTOSOUND DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE, VALIDITY, ACCURACY, OR RELIABILITY OF, OR THE RESULTS OF THE USE OF, OR OTHERWISE RESPECTING, THE MATERIALS OR PRODUCTS ON THIS SITE OR ANY SITES LINKED TO THIS SITE. Limitation of Liability UNDER NO CIRCUMSTANCES, INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE, SHALL DYNAMIC AUTOSOUND BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, HARM TO EQUIPMENT AND/OR PERSONAL INJURY OR DEATH, ARISING OUT OF THE USE, OR THE INABILITY TO USE, THE MATERIALS ON THIS SITE, EVEN IF DYNAMIC AUTOSOUND OR A DYNAMIC AUTOSOUND AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IF YOUR USE OF MATERIALS FROM THIS SITE RESULT IN THE NEED FOR SERVICING, REPAIR OR CORRECTION OF ANY ITEM YOU ASSUME ANY COST THEREOF. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. Typographical Errors In the event a product is listed at an incorrect price due to a typographical error, entry error or error in pricing information received from our suppliers, Dynamic Autosound shall have the right to refuse or cancel any orders placed for said product(s). Order Acceptance Policy Your receipt of an electronic or other form of order confirmation does not signify our acceptance of your order, nor does it constitute confirmation of our offer to sell. Dynamic Autosound reserves the right at any time after receipt of your order to accept or decline your order for any reason. Transmissions Any material, information or idea you transmit to or post on this site by any means will be treated as non-confidential and non-proprietary, and may be disseminated or used by Dynamic Autosound or its affiliates for any purpose whatsoever. Notwithstanding the foregoing, all personal data provided to Dynamic Autosound will be handled in accordance with Dynamic Autosound’s Privacy Policy. You are prohibited from posting or transmitting to or from this site any unlawful, threatening, libelous, defamatory, obscene, scandalous, inflammatory, pornographic or profane material or any other material that could give rise to any civil or criminal liability under the law. Children’s Online Policy Dynamic Autosound is committed to the preservation of online privacy for all of its web site visitors, including children. Consistent with the Children’s Online Privacy Protection Act, we will not knowingly collect any personally identifiable information from children under the age of 13. If you are a child under the age of 13, you must ask your parent or guardian to assist you in using Dynamic Autosound. Com. Term of Use Revisions Dynamic Autosound may at any time revise these Terms of Use by updating this posting. By using this site, you agree to be bound by any such revisions and should therefore periodically visit this page to determine the then current Terms of Use to which you are bound. All items we sell are GUARANTEED fully operational. This associated cost is non-refundable. Items improperly installed are not considered defective. Abused items are not considered defective. Add to Favorite Sellers. Sign up to Newsletter. View more great items. Cerwin-Vega V750.1D Vega Series Monoblock Class D Sub/Speakers Car Amplifier. RockFord Fosgate® T500X1br Power Amp Monoblock Class BR Subwoofer Amplifier 500W. Rockford Fosgate T750X1BD Power Series 750W Class-BD Monoblock Amplifier NEW. Rockford Fosgate® PBR300X1 Monoblock Class BR Punch Amplifier Sub Amp 300W New. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Rockford Fosgate Power T500-1bdCP Constant Power Series Class BD Monoblock Amp” is in sale since Friday, January 6, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers”. The seller is “dynamicautosound” and is located in Santa Ana, California. This item can be shipped worldwide.
  • RMS Power: 500W
  • Brand: Rockford Fosgate
  • Model: T5001BDCP
  • Channels: 2
  • MPN: T500-1BDCP
Rockford Fosgate AMP Integration Interface for Aftermarket Radio AXXESS AXTO-MI1

The MITO-01 is designed to be used in select Mitsubishi vehicles that have the Rockford Fosgate audio system. The Rockford Fosgate system uses a digital signal to turn on the amplifier. The MITO-01 supplies that digital signal to turn the amplifier on and also eliminates the “COM ERROR” message on the display when the OEM radio is removed. For Select Mitsubishi Vehicles with Rockford Fosgate Factory Amplified System. Supplies a digital signal to turn on the vehicles amplifier. Removes the “COM ERROR” message displayed when the OEM radio is removed. On vehicles with navigation, the MITO-01 supplies the VSS (Vehicle Speed Sense), parking brake, and reverse. 14 pin harness with RCA’s. Fits the following ROCKFORD FOSGATE AMPLIFIED systems. In stock in our store. Communication can solve 99% of problems, we care for every customer. The item “Rockford Fosgate AMP Integration Interface for Aftermarket Radio AXXESS AXTO-MI1″ is in sale since Tuesday, January 16, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Other Interior Parts & Accessories”. The seller is “muuvinsound” and is located in Orlando, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Interchange Part Number: MITO-01
  • Manufacturer Part Number: AXTO-MI1
  • Brand: Axxess
  • Warranty: Yes